Friday, April 9, 2010

Surface Finish & Finishing of DMLS - (Direct Metal Laser Sintering) Parts

FINISHING/POLISHING (SURFACE ROUGHNESS)
Parts “as built” off DMLS machines have a “raw” finish comparable to a fine investment cast, with a surface roughness of approximately 350 R a- μ inch or R a-μm 8.75, or a medium turned surface. This surface roughness can be improved all the way up to 1 R a- μ inch or R a-μm 0.025, qualifying as a super mirror finish. There are several processes available that can be used to achieve the desired surface roughness or finish. These processes include, but not limited to:

Abrasive Blast (Grit & Ceramic)
Abrasive blasting is the operation of forcibly propelling a stream of abrasive material (media) against a surface under high pressure to smooth a rough surface. Abrasive blasting services are included standard for all DMLS projects. If a “raw” DMLS part is desired, this should be noted at the time of the RFQ when addressing the desired surface roughness. Abrasive blasting with grit and ceramic media provides a satin, matte finish of approximately 150 R a- μ inch or R a-μm 24. This finish is largely uniform, but does not provide a 100% uniform finish.

Shot Peen
Shot peening is a process used to produce a compressive residual stress layer and modify mechanical properties of metals. It entails the use of media to impact a surface with sufficient force to create plastic deformation. It is similar to blasting, except that it operates by the mechanism of plasticity rather than abrasion. Peening a surface spreads it plastically, causing changes in the mechanical properties of the surface. Depending on the part geometry, part material, shot material, shot quality, shot intensity, and shot coverage, shot peening can increase fatigue life from 0–1000%. Shot peening is used primarily for foundries for deburring or descaling surfaces in preparation for additional post-processing.

Electrochemical Polishing
Electrochemical polishing also referred to as electro polishing, is an electrochemical process that removes material from metal parts through polishing, passivation, and deburring. It is often described as the reverse of electroplating; differing from anodizing in that the purpose of anodizing is to grow a thick, protective oxide layer on the surface of a material rather than polish. The process may be used in lieu of abrasive fine polishing in micro structural preparation, and is an inexpensive option for DMLS projects that are not tolerance dependent, creating a bright uniform finish. The extent to which electro polishing is successful depends upon the degree of preparation of the treated surfaces.

Abrasive Flow Machining (Extrude Hone) Polishing
Abrasive flow machining (AFM), also known as extrude honing is a method of smoothing and polishing internal surfaces and producing controlled radii. A one-way or two-way flow of an abrasive media is extruded through a workpiece, smoothing and finishing rough surfaces. One-way systems flow the media through the workpiece, then it exits from the part. In two-way flow, two vertically opposed cylinders flow the abrasive media back and forth. The process is particularly useful for difficult to reach internal passages, bends, cavities, and edges. This is an inexpensive option for DMLS projects that are not tolerance dependent, and a more uniform surface roughness. The extent to which AFM is successful depends upon the degree of preparation of the treated surfaces.

Electroplating
Electroplating is a process that uses electrical current to reduce ions of a desired material from a solution and coat a conductive object with a thin layer of the metal material. Electroplating is primarily used for depositing a layer of metal to bestow a desired property (e.g., abrasion and wear resistance, corrosion protection, lubricity, aesthetic qualities, etc.). Another application uses electroplating to build up thickness on undersized parts. Plating is also an inexpensive method of improving surface roughness, with the reduction in roughness once again hinging upon the degree to which surface are treated prior to plating. DMLS parts can also be plated in their raw state, and then finished in combination with another method.

Optical Polish (Hand Finishing)
When projects have geometries in low quantities that are not tolerance dependent, the best finishing option is an optical polish. Optical polishes are extremely cost effective, and the best way to achieve a brilliant finish. Due to surface porosity of DMLS metals, .003” to .010” of surface material is removed depending upon geometry. If this option is desired, it is imperative that designers or engineers consult with GPI prior to building, as specific surfaces may need to be offset with additional material to ensure part integrity after post-processing. Optical polishing is not ideal for large batches as it lends itself to an inconsistent finish from part to part.

Micro Machining Process (MMP)
Micro Machining Process (MMP) is a mechanical-physical-chemical surface treatment applied to items placed inside a treatment tank, providing highly accurate selective surface finishes. The desired surface finish is obtained by using MMP only on those areas where that particular finish is required. MMP begins with a detailed analysis of the surface state of the item to be treated, establishing the processing parameters required to meet the customer’s objectives. MMP can finely distinguish and selectively apply different primary roughness, secondary roughness and waviness profiles to surfaces. MMP is a batch process that is quite expensive, with costs ranging from $500 to $1000 for sample finish testing. After acceptable samples have been provided, costs for batch runs start at approximately $3000. This process has selective application, and is ideal for projects requiring precision tolerance finishing to a large number of parts, as well as parts with internal passages that cannot be reached by an alternate method.

CNC Finishing/Machining
CNC finishing permits high quality contoured milling applications to achieve tight tolerances. Detail-oriented precision can be accomplished with 3-axis, 5-axis and 6-axis CNC lathes. Conventional fixed headstock and Swiss-style CNC lathes can be utilized to support complex operations such as cross drilling and cross tapping, cross milling and slotting, C-axis milling and off-center work. Proper fixturing can yield tolerances as tight as 1 micron or (.00004). Should this post processing option be desired, pre-build planning is required to add sufficient material to machined features and surfaces so that tolerances can be met.


Cobalt Chrome MP1, media tumbled.


Cobalt Chrome MP1, optical polish #2


Cobalt Chrome MP1, optical polish (mirror finish) #3.


The shell behind the finished part is a "raw" part. You can see the contrast with this finish. This finish is the "optical finish". Stainless Steel. PH1.


This is an insert which had supports removed and abrasive blasted. MS1.


Raw with supports. Stainless Steel.


Stainless Steel PH1, shot peened finish.


Stainless Steel PH1, raw with supports removed.

Tim Ruffner
Account Executive
GPI Prototype & Manufacturing Services, Inc.
940 North Shore Drive
Lake Bluff, IL 60044
http://gpiprototype.com
Phone: 847.615.8900
Fax: 847.615.8920
Email: Timr@GPIprototype.com
GPI on Twitter
Tim Ruffner LinkedIn
*DMLS – Direct Metal Laser Sintering Blog

Specializing in:
* DMLS – Direct Metal Laser Sintering
* 3D Printing - Objet
* RTV Casting and Urethane Molds
* SLA, SLS, FDM, CNC
* Laser 3D Scanning
* Short Run 1-1000 Prototypes
* Manufacturing

24 comments:

  1. How would you rate ultrasonic impact treatment as a method to improve surface quality. I noticed you listed "shot peening", but from what I understand, ultrasonic impact treatment more effectively, quickly and cost efficiently improves surface quality and drives tensile stresses to a greater depth. What are your thoughts on this?

    ReplyDelete
  2. Wow! Its a great idea here.... Really very interesting found.... I enjoyed reading this blog post... Your really having a great collection of pictures. Thanks and keep posting....

    ReplyDelete
  3. I've observed a lot of discuss in the last regarding deregulation in Florida and to be sincere, I never really realized what that intended. Even though I have resided in Austin for almost all my lifestyle, I am a little bit humiliated to confess that I never compensated much interest to factors like the power industry or even the oil and gas industry.
    average electric bill.

    ReplyDelete
  4. I would really like your post ,it would really explain each and every point clearly well thanks for sharing.

    Sintered Parts India

    ReplyDelete

  5. Experience the thrill of outdoor laser tag skirmish in a new and exciting way.
    It’s an ideal activity for kids and teenagers birthday parties!
    Our Crew will arrive at least 15 minutes before your party starts to establish
    the playing area and set up the equipment.


    laser skirmish

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete
  7. Metal Polshing related informations are good to read.Thanks for sharing this post.

    If you want more Details on metal Polishing Cleick here Metal Polishing Tube Polishing

    ReplyDelete
  8. This is a great article thanks for sharing this informative information. I will visit your blog regularly for some latest post. I will visit your blog regularly for Some latest post.
    Buy Final Fantasy XIV Gil

    ReplyDelete
  9. Thank you for your recommendation through the blog post that helped in finding a solution and a perfect company to my Blasting Services, Alabama. By using different technologies and procedures of blasting, they were able to remove coatings, rust, paint from the steel surface. I appreciate entirely understanding my requirements and suggest the best practice of all the many processes involved with such different services. I will surely recommend Browning Enterprises Inc. for blasting services. The website link is https://beial.com.

    ReplyDelete
  10. I think this is a really good article. You make this information interesting and engaging. You give readers a lot to think about and I appreciate that kind of writing.
    Electropolishing

    ReplyDelete
  11. I will recommend anyone looking for Business loan to Le_Meridian they helped me with Four Million USD loan to startup my Quilting business and it's was fast When obtaining a loan from them it was surprising at how easy they were to work with. They can finance up to the amount of $500,000.000.00 (Five Hundred Million Dollars) in any region of the world as long as there 1.9% ROI can be guaranteed on the projects.The process was fast and secure. It was definitely a positive experience.Avoid scammers on here and contact Le_Meridian Funding Service On. lfdsloans@lemeridianfds.com / lfdsloans@outlook.com. WhatsApp...+ 19893943740. if you looking for business loan.

    ReplyDelete
  12. I think this is a really good article. You make this information interesting and engaging. You give readers a lot to think about and I appreciate that kind of writing.
    Mechanical Metal Polishing

    ReplyDelete
  13. I really congratulate the writer for creating such an impressive blog. Thank you for your valuable discussion on this great topic.
    optical polishing service

    ReplyDelete
  14. I am thankful to you because your article is very helpful for me to carry on with my research in the same area. Your quoted examples are relevant to my research as well.
    schott bk7 glass

    ReplyDelete
  15. Are Keenly Instrumental In Delivering To Our Patrons Highly Reliable And Finished All Plating Services All Buffing Services.
    These Services Are Imparted Under The Assistance Of Experienced Executives As Per The Set Market Norms We Provide Different
    Types Of Plating For Buffing Brass Copper Aluminum Steel. We Have Been Able To Offer Our Customers Exclusive Plating Buffing
    Services Our Team Of Experts Is Properly Trained And Primarily Focuses On The Customer Satisfaction As We Try To Build A
    Relationship With Our Clients Contact Us For The Best Deals. We Provide Mate Finishing & Mirror Polishing Iron, SS, Steel,
    Braas, and Aluminum. All Type Of Copper Metal Buffing Polishing. Chrome Plating, Metal Plating, Ss Stainless Steel Plating,
    Nickel Plating, Hard Chrome, Electro Polishing, Electro Plating, Services In Ahmadabad.
    All metal buffing and polishing works in ahmedabad
    Stainless Steel Electro Plating Services in Gujarat
    Electro Plating Services in Ahmedabad

    ReplyDelete
  16. I should thank you for writing on this topic, very useful information you have given through this blog. Glass Cutting Service.

    ReplyDelete
  17. I was unaware of much of what you wrote about in your article. Your information was very helpful and I hope others feel the same. Wonderful work. Colored Optical Glass Filters.

    ReplyDelete
  18. This is something I was searching for many days. My thirst has been quenched now after reading your article.I am highly thankful to you for writing this article. Thin Film Coatings .

    ReplyDelete
  19. I am highly impressed by your work and will recommend your tips to everyone in my circle so that they could also take the benefits.
    precision lapping services

    ReplyDelete
  20. I’d like to thank you for writing on this topic. The information you provided was very useful. I will visit again in the near future. Infrared Germanium Optical Wafer From Valley Design.

    ReplyDelete
  21. Awesome and interesting article. Great things you've always shared with us. Thanks. Just continue composing this kind of post. Aluminum Nitride (AlN) CNC Machining Services provided by Valley Design.

    ReplyDelete
  22. Thanks for publishing such best knowledge with us. You are doing such a great job. This info is very helpful for everyone. Keep it up. Glass CNC Machining Service By Valley Design.

    ReplyDelete
  23. Your blog held my interest right to the very end, which is not always an easy thing to do!! Aluminum Nitride Substrates & Wafers From Valley Design.

    ReplyDelete